Izdelki za jeklena jekla (40)

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

Qualität ohne Kompromisse

Brennschneideanlagen für schweren Stahlschrott: Technologie für das Zerkleinern von schwerem Stahlschrott für Stahlwerke, Gießereien, Recyclingbetriebe und Schrotthändler DIE BRENNSCHNEID­ANLAGE FÜR SCHWEREN STAHLSCHROTT Autogenschneidanlagen, die sämtlichen Ansprüchen an Umwelt- und Arbeitsschutz entspricht, mobil oder stationär. Unser in Attnang-Puchheim ansässiges Unternehmen ist stets bemüht, Ihre Aufträge rasch und zu Ihrer vollen Zufriedenheit zu erfüllen. Gerne nehmen wir Ihre Anfrage entgegen!

Der Einsatz hochfester Stahldrähte in Verbindung mit einer dicken Aluminiumbeschichtung ergibt gegenüber herkömmlichen verzinkten Stahldrähten wesentliche Vorteile. Dabei handelt es sich um hochfeste Stahldrähte, die in einem speziellen Extrusionsverfahren mit Aluminium beschichtet und anschließend in einem hydrodynamischen Ziehprozess auf den erforderlichen Enddurchmesser gezogen werden. Sie werden als Substitut zu verzinktem Stahl in Freileitungsseilen eingesetzt. STALUM-DRÄHTE dienen einerseits der Eigenproduktion von Freileitungsseilen und andererseits wird damit auch die Kabelindustrie beliefert.

eldax liefert Aluminiumrohre oder Rohre aus feuerverzinktem Stahl und Edelstahl. Ob steckbare Alurohre oder Aluminiumrohre mit Gewinde oder Zubehör für Rohre wie Klemmschellen oder Abstandsschellen, bei eldax erhalten Sie für jede Anwendung das passende Produkt mit unterschiedlichen Materialien. Stöbern Sie jetzt durch die Produktauswahl an starren Rohren von eldax! Aluminiumrohre Alu Steck- ESS Alu Steck- ESB Alu Gewinde- ESG Zubehör für Aluminium Rohre AMS-E ABS-E AES-E AMG-E ABG-E E-Ku-E AEG-E AKS-E ASG-E SSG-E-V

Vom herkömmlichen Bügelständer bis zur Sonderanfertigung - aus Edelstahl - für die Lagerung und Sortierung der Kleiderbügel. Bügelständer - Sonderanfertigung. Die Bügel brauchen nicht mehr sortiert werden!

Sensible Arbeitsschritte für den perfekten Feinschliff: Nach Abarbeitung der Teile von den Maschinen kommen diese zur Endbearbeitung, d.h. Entgraten, Polieren und Feinarbeiten von Hand. Auch unsere Komponentenfertigung wird in dieser Abteilung gewissenhaft durchgeführt. DIE GANZHEIT VERVOLLKOMMNET SICH AM ENDE!

neue Gummiwalzen, Walzenkern und Walzengummierung aus einer Hand. max. Gesamtgewicht 3,2t - max. Gesamtlänge 6,5m - max. Durchmesser 800mm Maßgeschneiderte Gummiwalzen. Darüber hinaus entwickeln und produzieren wir individuelle Walzenkerne, die auf Ihre Aufgabenstellung zugeschnitten sind. Hierbei sind wir in der Lage, die Kerne in allen gängigen Werkstoffen zu fertigen, z.B. Aluminium, Stahl und Edelstahl, ebenso wie GFK und CFK. Sie erhalten die Walzenkerne in Kombination mit der Beschichtung als Komplettlösung aus einer Hand. Auch wenn Sie die Kerne selbst konstruieren, fertigen wir sie anhand Ihrer Zeichnungen – präzise und innerhalb kurzer Zeit. Als erfahrener Hersteller für Gummiwalzen stehen wir Ihnen mit fachkompetenter Beratung zur Seite.

La machine à gouttières AMB-WIBA est une machine stationnaire hautement précise pour la production efficace et de haute qualité de gouttières dans les ateliers et les entreprises de production. Elle traite des tôles métalliques d'épaisseur comprise entre 0,5 mm et 1,0 mm et fabrique des gouttières dans les dimensions de 200 mm, 250 mm, 333 mm, 400 mm et 500 mm. Grâce à une technologie avancée de profilage par rouleaux, la tôle est pliée en forme souhaitée par des paires de rouleaux précises. La machine offre une grande vitesse de production et une reproduction précise. Elle est conçue pour un fonctionnement continu et possède une construction robuste nécessitant un minimum d'entretien. Équipée d'un contrôle automatisé et d'un écran tactile convivial, elle permet des ajustements faciles et une grande efficacité. Des dispositifs de sécurité et des options d'extension pour des étapes de traitement supplémentaires en font la solution idéale pour la production industrielle de gouttières. sheet width:200-500 mm speed:1800m/h shapes: Gouttière ronde et gouttière en caisse

BVHS-GD 400 STEEL GALVANISED BVEHS-GD 400 STAINLESS STEEL Load Capacity: 400 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Underside of cover reinforced with steel girder. The frame is reinforced with an additional frame. Hot-dip galvanised. Or grade 304 stainless steel. High-load hinges. High-specification double-piston gas struts. EPDM seal. Robust steel mesh reinforcement. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaran- teed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. The access cover has a water drain nozzle. There is the option (if required) to connect a drain...

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

Load capacity: pedestrian Material: Frame fabricated from rolled sections, durbar-plate cover. Hot dip galvanised. Features: Simple durbar-plate pedestrian area cover with recessed fastener. Non-sealed cover. Lifting key included. Applications: For simple covers used subordinately.

Load capacity: 250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete. Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C 35/45 concrete (EN 206) Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Sealed cover with 10 cm deep recess. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement, crosswise welded. Opening tool included. The Lift-Off opening system: Every HAGODECK Type BVH-maxi steel cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings and their surroundings. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 10.2 cm Installation height ≈ 12.5...

Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work. Versions: In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors. The Lift-Off opening system: Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the...

Load capacity: pedestrian Material: BV-shallow: frame and cover in 2mm cold formed precision steel profiles, hot-dip galvanised. BVE-shallow: frame and cover made of grade 304 stainless steel. Features: Sealed. Cover with an installation depth of only 5 cm. Particularly suitable for situations where greater installation depth is not available. Since the cover is shallower, this means that it is not so heavy when filled in - so less effort is required to lift the cover. The bottom of the cover is reinforced. EPDM seal. Tapered design allows easy opening. Steel reinforcement guarantees good adhesion between the concrete infill and the bottom of the cover. The Lift-Off opening system: Every HAGODECK Type BV(E) shallow cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For pedestrian use inside buildings and their surroundings. Installation: Installation must...

Die KMH GmbH bietet Systemlösungen für Energieversorgungsunternehmen und für die Industrie an.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.

Ein Teil unserer Edelstahl-Produkte wird in der Trinkwasser, Lebensmittel- sowie Chemieindustrie eingesetzt.

Zerkleinern von Stahl- und Eisenteilen mittels Autogentechnologie EINSATZBEREICHE DER BRENNSCHNEIDANLAGE Unser Service kommt überall dort zum Einsatz, wo das Zerkleinern von Stahlteilen mittels Autogentechnologie nötig ist. Neben der klassischen Zerkleinerung von Schrottteilen zum Einsetzen in Öfen ist zum Beispiel auch das Brammenquer- oder -längsteilen einer von vielen Einsatzbereichen unserer Brennschneidanlage. BEISPIELHAFTE BRANCHEN: Stahlwerke Gießereien Recyclingbetriebe Schrotthändler Demontagefirmen

Mobile Brennschneideanlagen für schweren Stahlschrott werden eingesetzt in Stahlwerken, Gießereien, Recyclingbetrieben, Demotagefirmen und bei Schrotthändlern. Unsere Anlagen kommen überall dort zum Einsatz, wo das Zerkleinern von Stahlteilen mittels Autogentechnologie nötig ist. Neben der klassischen Zerkleinerung von Schrottteilen zum Einsetzen in Öfen ist zum Beispiel auch das Brammenquer- oder -längsteilen einer von vielen Einsatzbereichen unserer Brennschneidanlage. BEISPIELHAFTE BRANCHEN: Stahlwerke Gießereien Recyclingbetriebe Schrotthändler Demontagefirmen DIE BRENNSCHNEID­ANLAGE FÜR SCHWEREN STAHLSCHROTT Die Autogenschneidanlage entspricht allen Anforderungen an den Umweltschutz und sorgt für einen sicheren und komfortablen Arbeitsplatz für den Bediener.

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Material: Steel-plate cover, frame made of cold formed sections. Hot-dip galvanised. With hinge. Cover can be removed from the open position. Covered hasp locking device (padlock not included). Ventilation pipe (Ø 10 cm) fitted with cowl and insect-excluding mesh. Sealed with hollow chamber seal. Applications: For individual wells, spring water catchments, high-level tanks etc. Total height including ventilation cylinder ≈ 30 cm. *S = available from stock *O = to order

Große praxiserprobte Modellvielfalt in 3, 4, 5 und 6 mm Drahtdurchmesser für Tunnelfinisher, Kleiderausgabeautomaten sowie Sortieranlagen. Gefertigt aus hochqualitativem Edelstahl. Edelstahlkleiderbügel für Textilreinigungsbetriebe Edelstahlbügel 4mm, mit Funktionskleme und Verkeilssperre, Schulterauflagen aus Edelstahl 16mm breit, fix mit Bügel verbunden. Barcodehalter U-44 für Tunnelfinisher, Kleiderausgabeautomaten sowie Sortieranlagen.